Telecommunication Equipment
Dual channel HD encoder with DVB-S2 satellite if output with LOW DELAY.
Encoder from HD / SD SDI or CVBS to MPEG-4 AVC or MPEG2.
Encoding delay-80msec. The IP output can receive up to 4 programs with different resolutions. For example two with HD resolution and their clones with lower resolution (for example 320×240 for reception on mobile devices).
Read more
Encoder from HD / SD SDI or CVBS to MPEG-4 AVC or MPEG2. Encoding delay-80msec. The output IP can be obtained up to 4 programs with different resolutions. For example: two programs with HD resolution and their clones with lower resolution (for example, 320×240 resolution for reception on mobile devices).
Read more
Multi-functional Converter-Remultiplexer is designed to convert eight digital streams of ASI in two RF signals DVB-T format in the range of 36-850 MHz with an output of 1 RF connector. The adjustable level of the RF signal at the output. IP output to transport one of the packets to the IP network or the ability to control one packet selected from the input or input streams on the PC (protocols RTP, UDP, RTP+).
Read more
The encoder is designed to convert HD / SD SDI and CVBS signals into an MPEG-4 /AVC(MPEG-4 Part 10) signal that complies with ITU-T H. 264 standard and the ISO/IEC MPEG-4 Part 10 standard and Mpeg 2 standard. The ability to operate the encoder in SD mode and HD mode allows you to fully use the capabilities of the encoder. In MPEG-4 SD mode, the device allows almost no loss of image quality, to receive the amount of transmitted data in ~1.5-2 times greater than when using an encoding device of the MPEG2 standard.
Read more
Compact (1U-19") 8 channel professional receiver decoder. 8 ASI outputs of the device is ideally combined with devices TELEVIEW DVB C-1 IP/8ASI-4rf. 8 ASI inputs, in combination with which it turns out a very compact, but quite functional mini head station DVB-C.
Read more
The encoder is designed to convert HD / SD SDI and CVBS signals into an MPEG-4 /AVC(MPEG-4 Part 10) signal that complies with the ITU-T H. 264 standard and the ISO/IEC MPEG-4 Part 10 standard and Mpeg 2 standard. The ability to operate the encoder in SD mode and HD mode allows you to fully use the capabilities of the encoder.
Read more
Remultiplexing device with time shift function" Time Shifting " — provides a time delay of any of the input TV programs with three different time intervals with subsequent multiplexing of this group of channels into the final output stream.
Read more
The Remux 5ASI-ASI is designed for use in digital (DVB-C) cable networks. The basic configuration of Remux 5ASI-ASI provides the formation of 5 input ASI streams required software package and issue it to the ASI output - (Remultiplexer). The device does not have the usual QAM modulator.
Read more
The encoder is designed to convert SD and HD standard signals, and input HD/SDSDI and HDMI and CVBS signals into MPEG-4 /AVC(MPEG-4 Part 10) signal, corresponding in its performance standards ITU-T H. 264 standard and the ISO/IEC MPEG-4 Part 10 standard and Mpeg2 standard.
Read more
Encoder from HD / SD SDI or CVBS to MPEG-4 AVC or MPEG2. At the IP output, you can get up to 4 programs with different resolutions. For example, two streams with HD resolution and their clones with lower resolution (for example, 320×240 for receiving on mobile devices).
Read more
Encoder from HD / SD SDI or CVBS to MPEG-4 AVC or MPEG2. At the IP output, you can get up to 4 programs with different resolutions. For example, two streams with HD resolution and their clones with lower resolution (for example, 320×240 for receiving on mobile devices).
Read more
It can receive digital signals from various sources (DVB-S/S2, DVB-C, DVB-T/DVB-T, ASI, IP), decoding, program selection for various outputs including CVBS, HDMI, SD/HD-SDI, ASI, TS/IP and QAM/OFDM.
Read more
This product combines 2 functions-an MPEG4/MPEG2 encoder with SDI input, and a transcoder 1 program in the transport stream with ASI input. The choice of one of the 2 functions is carried out by a simple flashing of the product, which can be done by the user himself. This product can be a built-in option of dsc945, DSC865 mixers.
Read more
The ASI output module / Board is designed for household DVB-S, DVB-C, DVB-T receivers for self-installation in the receiver housing. This is a budget option to replace a professional receiver with ASI output.
Read more
The ASI and IP output module / Board for DVB-S , DVB-C, DVB-t household receivers is Designed for self-installation in the receiver housing. This is a budget option to replace a professional receiver with ASI output.
Read more
The Converter is designed to be used as a high-quality version of the audio signal transmission in uncompressed form with a small time delay. It can be used to transmit over ASI or Ethernet between studios or to a radio station, or to transmit over RRL.
Read more
HDMI decoder and composite video signal from IP stream MPEG4/AVC signal.
It is used to work with MPEG4 and MPEG2 encoders. There is an automatic recovery of operation in case of power failure.
Read more
Fсable 1488 digital set-top box is designed to receive digital cable programs in DVB-C format. It is used with conditional access systems, DVCrypt , CerberCrypt.
Read more
For self-firmware And maintenance of dvcrypt conditional access cards. Package includes: Card programmer; 10 test cards and connecting cables; DVCrypt management program.
Read more
Professional decoder. ASI, DVB-S2 inputs. Outputs HD SDI, composite, HDMI. It is used to work with MPEG4 / 2 Teleview frames and allows to receive decoded HD SDI, HDMI, composite signals.
Read more
The processor is a multifunctional device for digital television broadcasting over cable networks. Solves most of the technical problems faced by the cable operator in the formation of the head station.
Read more
Multi-functional device designed taking into account the features of video signals transmission via RRL and broadcasting to the satellite. Can work in two standards DVB-S and DVB-S2.
Read more
The device is intended for hotel and sanatorium complexes, for distribution of programs of digital broadcasting. Unlike classical analog distribution networks, it allows you to create a software package and distribute the signal to subscribers over long distances without loss of quality. Group processing and formation of a group signal is carried out by one device.
Read more
The processor is a multifunctional device for digital television broadcasting over cable networks. Solves most of the technical problems faced by the cable operator in the formation of the head station. Processor generates in the group spectrum up to 4 packages of programs in DVB - C format ( in the range of 36-900 MHz range of frequencies broadcast in the cable network) with an output of 1 RF connector.
Read more
Generates a group spectrum of up to 2 DVB - C packages at 2 frequencies (in the range of 36-900 MHz (the frequency range of broadcasting in the cable network) with an output of 1 RF connector. It is possible to use the Processor in conjunction with analog cable network equipment with simultaneous broadcasting of both analog and digital signals in the same network.
Read more
This product combines 2 functions-an MPEG4/MPEG2 encoder with HDMI,SDI, CVBS inputs, and a transcoder 1 program in the transport stream. The choice of one of the 2 functions is carried out by a simple switch in the control program, which can be done by the user himself.
Read more
The device is designed to form the delay of television programs in digital cable television (DVB-C). The main function of 4ASI-time shifting is the time delay of ASI stream, with the ability to delay 1 program in a stream with three different time intervals. This solution allows you to shift in time the program and broadcast it in 3 different time intervals, which allows viewers to view rated programs or movies at a convenient time for them. It is possible to use multiple devices at the same time to delay multiple programs.
Read more